draw speed meaning in English
牵伸速度
Examples
- It was suitable for melt spinning that temperature was 100 ~ 150 , revolving speed was 10 ~ 15r / min and drawing speed was 2 ~ 5m / min
通过研究发现温度是影响熔融纺丝的关键因素，熔融纺丝较适宜的条件是：温度为100 150 ，挤出机转速为10 15r min ，拉伸速率为2 5m / min 。 - Pdlla / ha composite fibers were produced by melt spinning , and the choices of the process parameters such as temperature , revolving speed and drawing speed etc were discussed
选用熔融纺丝法制备pdlla ha复合纤维，探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。 - By using a triangle three - section contact type resistance short - circuit continuous annealing technology , it is possible to save power , and to functionally follow the drawing speed , having the advanced capacity of zero annealing
采用紧凑的三角形,三段接触式电阻短路连续退火工艺,高效节能,并能函数自动跟踪拉丝速度,具有先进的零退火功能。 - The system developed in this paper has the following advantages : parametric drawing , high drawing speed , high accuracy of unfolding drawing , analyze the unfolding drawing of sheet metal when dimension has been changed , wide application
通过实践验证，本系统具有以下优点：展开图形参数化，图形生成速度快，展开图精度高；而且可以对随着钣金构件尺寸变化时的展开图图形进行分析。 - The heat - treatment temperature , the doping concentration of ag ( ag / si ) and drawing speed of the substrates can regulate the size , amount and distribution of silver nanaparticles in the matrix , and then influence the optical absorption of the samples
结果表明，复合膜的处理温度、银的掺杂浓度和薄膜制备时的提拉速度都可使样品的银粒子的大小、数量和分布产生变化，从而影响样品的光吸收性能。